New Scag SLS
$4,550 MSRP - Stop by our location for the best price!
| General Information | |
|---|---|
| Sku | SLS-52H-22PX |
| Serial | Z6400609 |
| Make | Scag |
| Model | SLS |
| Engine | Briggs PXi |
| Horsepower | 22hp |
| Deck Size | 52" |
| Fuel Type | Gasoline |
| Condition | New |
| Hours | 0 |
| Warranty | Mower non-commercial 3 year / 300 hour. Engine 3 year. |
| Drive Tires | 20" x 10" - 8" |
| Caster Tires | 11" x 6" - 5" |
| Seat | Padded (arm rests optional), adjustment forward and back (tools required) |
| Dimensions / Capacities | |
|---|---|
| Weight | 646 lbs |
| Length | 67.5" |
| Width Chute Down | 64.5" |
| Width Chute Up | 53" |
| Height ROPS Folded | 39" |
| Height Rops Up | 39" |
| Fuel Capacity | 3.5 gallons |
| Drive System | |
|---|---|
| Drive System Type | Hydro-Gear ZT2200 Transaxle (EZT) |
| Pumps | Internal Pump: 10cc |
| Motors | Internal Motor: 10cc |
| Forward Speed | 7mph |
| Reverse Speed | 5mph |
| Parking Brake | Hand lever |
| Deck | |
|---|---|
| Cutting Width | 52" |
| Deck Type | Heavy-Duty Hero Cutter Deck |
| Cutting Height | 1.5" to 4.5" in .25" increments |
| Deck Lift | Foot-operated pedal |
| Deck Construction | Dual-plate cutter deck constructed of 2 steel plates. Reinforcement plate at cutter deck spindles. |
| Deck Spindles | Aluminum housing with sealed ball bearings. |
| Blade Engagement | Ogura GT1 - 74ft.lbs. |
Vestibulum sit amet ligula eget nibh cursus bibendum et id eros. Nam congue, dui quis consectetur blandit, neque neque mattis diam, vitae egestas urna lectus eu turpis. In vitae commodo sem. Etiam vehicula sed ligula malesuada cursus. Cras augue elit, tempus at dignissim sed, egestas eget leo. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; Nam mollis luctus nibh et bibendum. Morbi congue lectus nec congue congue. Nulla molestie feugiat quam ac sollicitudin. Nulla sed congue lectus. Donec blandit elit sit amet aliquet laoreet.
We have a low 6.225% sales tax!
Contact us if you would like an estimation on a monthly payment.
To save time, you can get pre-approved from home at the links below.
Ogura PTO Clutch Brake
STRONG, ADJUSTABLE CLUTCH FOR LONG LIFE
The Ogura PTO Clutch Brake provides excellent starting and stopping power for the cutter deck and an adjustable air gap for long life.
Heavy-duty construction
A DECK FOR THE LONG HAUL
Hero Cutter Decks in 42", 52" and 61" are deep, fabricated and designed to handle a lot of grass at higher speeds, while producing an excellent quality-of-cut. Heavy-duty, aluminum, sealed ball bearing, blade-drive spindles provide long-term performance.
Strong bones
PROVEN STRENGTH
The SLS features the same tubular-steel main frame as the Liberty Z for unmatched strength and longevity.
Take no prisoners
RELIABLE POWER UP TO 24 HP
Briggs & Stratton engine options power ground speeds up to 7 mph.
Ease of maintenance
SPEND MORE TIME MOWING
Fewer grease points mean less upkeep for owner convenience.
Cutting-edge design
SPEND MORE TIME IN THE SEAT
Sit more comfortably with a seat that allows natural airflow, optimal water drainage, and ergonomic comfort. An optional armrest kit accessory is available for those who prefer additional support.
Smooth, solid power
PROVEN HYDRO TRANSAXLES
Get continuous power with the HydroGear ZT2200 (EZT) with 10cc pumps and 10cc motors.
The long and short of it
EASILY ADJUST HEIGHT
Quickly adjust height-of-cut from 1½" to 4½" in ¼" increments.
Stability and traction
TOP MANEUVERABILITY AND PERFORMANCE
With rear tire size of 20×8-8 on the 42" and 20×10-8 on the 52" and 61" you’ll roll smoothly and evenly on any terrain.
Contact us if you would like an estimation on a monthly payment.
To save time, you can get pre-approved from home at the links below.
Ogura PTO Clutch Brake
STRONG, ADJUSTABLE CLUTCH FOR LONG LIFE
The Ogura PTO Clutch Brake provides excellent starting and stopping power for the cutter deck and an adjustable air gap for long life.
Heavy-duty construction
A DECK FOR THE LONG HAUL
Hero Cutter Decks in 42", 52" and 61" are deep, fabricated and designed to handle a lot of grass at higher speeds, while producing an excellent quality-of-cut. Heavy-duty, aluminum, sealed ball bearing, blade-drive spindles provide long-term performance.
Strong bones
PROVEN STRENGTH
The SLS features the same tubular-steel main frame as the Liberty Z for unmatched strength and longevity.
Take no prisoners
RELIABLE POWER UP TO 24 HP
Briggs & Stratton engine options power ground speeds up to 7 mph.
Ease of maintenance
SPEND MORE TIME MOWING
Fewer grease points mean less upkeep for owner convenience.
Cutting-edge design
SPEND MORE TIME IN THE SEAT
Sit more comfortably with a seat that allows natural airflow, optimal water drainage, and ergonomic comfort. An optional armrest kit accessory is available for those who prefer additional support.
Smooth, solid power
PROVEN HYDRO TRANSAXLES
Get continuous power with the HydroGear ZT2200 (EZT) with 10cc pumps and 10cc motors.
The long and short of it
EASILY ADJUST HEIGHT
Quickly adjust height-of-cut from 1½" to 4½" in ¼" increments.
Stability and traction
TOP MANEUVERABILITY AND PERFORMANCE
With rear tire size of 20×8-8 on the 42" and 20×10-8 on the 52" and 61" you’ll roll smoothly and evenly on any terrain.
