2024 Scag Cheetah II
$15,749 MSRP - Stop by our location for the best price!
| General Information | |
|---|---|
| Sku | SCZII-61V-37BV-EFI |
| Serial | S8101949 |
| Make | Scag |
| Model | Cheetah II |
| Engine | Briggs Vanguard EFI |
| Horsepower | 37hp |
| Deck Size | 61" |
| Fuel Type | Gasoline |
| Condition | Used |
| Hours | 65 |
| Warranty | Mower non-commercial 3 year (Extendable to 5 years) / 500 hour. Mower commercial 2 year (Extendable to 5 years). Spindles & deck 3 year. Engine 3 year. |
| Drive Tires | 24" x 12" - 12" |
| Caster Tires | 13" x 6.5" - 6" |
| Seat | 4-point iso-mounted mid-back mounted on operator-suspension platform |
| Dimensions / Capacities | |
|---|---|
| Weight | 1,395 lbs |
| Length | 85.5" |
| Width Chute Down | 73.5" |
| Width Chute Up | 62.75" |
| Height ROPS Folded | 49.5" |
| Height Rops Up | 67" |
| Fuel Capacity | 13 gallons |
| Drive System | |
|---|---|
| Drive System Type | Hydro-Gear ZT5400 Transaxle. Two-Speed |
| Pumps | Internal Pump: 16 cc |
| Motors | Internal Motor: 21 cc |
| Forward Speed | 16mph |
| Reverse Speed | 8mph |
| Parking Brake | Foot-operated pedal |
| Deck | |
|---|---|
| Cutting Width | 61" |
| Deck Type | Velocity Plus™ Cutter Deck |
| Cutting Height | 1.25" to 5" in .25" increments |
| Deck Lift | Adjustable foot operated pedal |
| Deck Construction | Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2" of steel. Reinforcement plates at cutter deck spindles. |
| Deck Spindles | Cast-iron housing w/ tapered roller bearings |
| Blade Engagement | Ogura GT5 - 350ft.lbs. |
Vestibulum sit amet ligula eget nibh cursus bibendum et id eros. Nam congue, dui quis consectetur blandit, neque neque mattis diam, vitae egestas urna lectus eu turpis. In vitae commodo sem. Etiam vehicula sed ligula malesuada cursus. Cras augue elit, tempus at dignissim sed, egestas eget leo. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; Nam mollis luctus nibh et bibendum. Morbi congue lectus nec congue congue. Nulla molestie feugiat quam ac sollicitudin. Nulla sed congue lectus. Donec blandit elit sit amet aliquet laoreet.
We have a low 6.225% sales tax!
Contact us if you would like an estimation on a monthly payment.
To save time, you can get pre-approved from home at the links below.
This is a low hour, well maintained demo unit that is being sold with full warranty.
The envy of the neighborhood
61" OR 72" CUTTING WIDTH
The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scags ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing.
Ogura PTO Clutch Brake
STRONG, ADJUSTABLE CLUTCH FOR LONG LIFE
The Ogura GT5 PTO Clutch Brake provides excellent starting and stopping power for the cutter deck, 350 ft. lb. of holding strength, and an adjustable air gap for long life.
Heavy-Duty, Double-Tube Steel Main Frame
SOLID DESIGN FOR YEARS OF DEPENDABLE SERVICE
The Cheetah™ is ultra-strong and built for long life. It has a wide mower stance and extra-low center of gravity for ultimate stability and a replaceable front caster-wheel weldment.
Hydro-Gear ZT-5400 Transaxles
SPEEDS UP TO 16 MPH!
Two-speed ZT-5400 transaxle lets you choose either Low Range to travel up to 12 mph or High Range for up to 16 mph. Internal 16 cc pumps and 21 cc motors help provide speed, power and torque. The transaxles design greatly reduces hoses and possible leak points.
Ease of Maintenance
MORE UPTIME
Flip-up components, easy-to-reach grease Zerks and many more features make servicing the Cheetah™ simple, so you can be in the shop less and on the job more.
Cheetah II Operator Suspension System
UNPARALLELED COMFORT
With five settings from soft to firm, the Operator Suspension System isolates the operator from the effects of rough terrain, providing unmatched comfort without sacrificing quality-of-cut. A coil-over shock provides effective suspension action right where its needed, and only where its needed. The seats 4-point, rubber iso-mounting provides even more shock absorption, maximizing your comfort, hour after hour.
Tiger Eye Advanced Monitoring System
KEEP A REAL-TIME "EYE" ON IMPORTANT SYSTEM FUNCTIONS
Depending on the mower model and engine selection, the Tiger Eye™ Advanced Monitoring System monitors a wide variety of systems in real-time, giving you valuable information in just a glance, right from the operators seat.
12-Volt Outlet
KEEP YOUR DEVICE CHARGED AND READY
12-volt outlet for added convenience allows operators to plug in small accessories or keep their phones at full charge.
Powerful and Efficient Engine Options
HUGE POWER, UP TO 38 HP
Choose either a powerful, 38HP Kawasaki® or 37HP Briggs Vanguard™ air-cooled; electronic fuel injection (EFI) engine. Rear-Discharge model features 31HP Kawasaki FX engine.
Contact us if you would like an estimation on a monthly payment.
To save time, you can get pre-approved from home at the links below.
This is a low hour, well maintained demo unit that is being sold with full warranty.
The envy of the neighborhood
61" OR 72" CUTTING WIDTH
The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scags ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing.
Ogura PTO Clutch Brake
STRONG, ADJUSTABLE CLUTCH FOR LONG LIFE
The Ogura GT5 PTO Clutch Brake provides excellent starting and stopping power for the cutter deck, 350 ft. lb. of holding strength, and an adjustable air gap for long life.
Heavy-Duty, Double-Tube Steel Main Frame
SOLID DESIGN FOR YEARS OF DEPENDABLE SERVICE
The Cheetah™ is ultra-strong and built for long life. It has a wide mower stance and extra-low center of gravity for ultimate stability and a replaceable front caster-wheel weldment.
Hydro-Gear ZT-5400 Transaxles
SPEEDS UP TO 16 MPH!
Two-speed ZT-5400 transaxle lets you choose either Low Range to travel up to 12 mph or High Range for up to 16 mph. Internal 16 cc pumps and 21 cc motors help provide speed, power and torque. The transaxles design greatly reduces hoses and possible leak points.
Ease of Maintenance
MORE UPTIME
Flip-up components, easy-to-reach grease Zerks and many more features make servicing the Cheetah™ simple, so you can be in the shop less and on the job more.
Cheetah II Operator Suspension System
UNPARALLELED COMFORT
With five settings from soft to firm, the Operator Suspension System isolates the operator from the effects of rough terrain, providing unmatched comfort without sacrificing quality-of-cut. A coil-over shock provides effective suspension action right where its needed, and only where its needed. The seats 4-point, rubber iso-mounting provides even more shock absorption, maximizing your comfort, hour after hour.
Tiger Eye Advanced Monitoring System
KEEP A REAL-TIME "EYE" ON IMPORTANT SYSTEM FUNCTIONS
Depending on the mower model and engine selection, the Tiger Eye™ Advanced Monitoring System monitors a wide variety of systems in real-time, giving you valuable information in just a glance, right from the operators seat.
12-Volt Outlet
KEEP YOUR DEVICE CHARGED AND READY
12-volt outlet for added convenience allows operators to plug in small accessories or keep their phones at full charge.
Powerful and Efficient Engine Options
HUGE POWER, UP TO 38 HP
Choose either a powerful, 38HP Kawasaki® or 37HP Briggs Vanguard™ air-cooled; electronic fuel injection (EFI) engine. Rear-Discharge model features 31HP Kawasaki FX engine.
