New Scag Finish Cut Walk-Behind
$2,500 MSRP - Stop by our location for the best price!
| General Information | |
|---|---|
| Sku | SFC-30-7CV-S |
| Serial | T4501612 |
| Make | Scag |
| Model | Finish Cut Walk-Behind |
| Engine | Kohler |
| Horsepower | 7hp |
| Deck Size | 30" |
| Fuel Type | Gasoline |
| Condition | New |
| Hours | 0 |
| Warranty | Mower non-commercial 3 year (Extendable to 5 years) / 500 hour. Mower commercial 1 year (Extendable to 2 years). Engine 3 year. |
| Drive Tires | 10.5" x 3" Rubber Tire |
| Caster Tires | 9" x 2.25" Swivel Rubber Tire |
| Seat | N/A |
| Dimensions / Capacities | |
|---|---|
| Weight | 227 lbs |
| Length | 76.5" |
| Width Chute Down | 36.75" |
| Width Chute Up | 31.5" |
| Height ROPS Folded | 57.5" |
| Height Rops Up | 45.25" |
| Fuel Capacity | 1 gallons |
| Drive System | |
|---|---|
| Drive System Type | GT MV 702 Transmission |
| Pumps | N/A |
| Motors | N/A |
| Forward Speed | 4mph |
| Reverse Speed | N/A |
| Parking Brake | Hand lever |
| Deck | |
|---|---|
| Cutting Width | 30" |
| Deck Type | Extra-strong, fully fabricated and welded steel cutter deck. Offset blade, non-timed deck setup. |
| Cutting Height | 1.5" to 5" in .25" increments. |
| Deck Lift | Hand lever. Single-point adjustment. |
| Deck Construction | 14-gauge, grade 100, Military Grade steel deck shell with 12-gauge spindle reinforcement plate. ¼” trim side reinforcement bar offers extra protection against impacts. |
| Deck Spindles | Aluminum housing with sealed ball bearings. |
| Blade Engagement | Blade brake clutch allows operator to disengage cutter blades without shutting off the machine. |
Vestibulum sit amet ligula eget nibh cursus bibendum et id eros. Nam congue, dui quis consectetur blandit, neque neque mattis diam, vitae egestas urna lectus eu turpis. In vitae commodo sem. Etiam vehicula sed ligula malesuada cursus. Cras augue elit, tempus at dignissim sed, egestas eget leo. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; Nam mollis luctus nibh et bibendum. Morbi congue lectus nec congue congue. Nulla molestie feugiat quam ac sollicitudin. Nulla sed congue lectus. Donec blandit elit sit amet aliquet laoreet.
We have a low 6.225% sales tax!
Contact us if you would like an estimation on a monthly payment.
To save time, you can get pre-approved from home at the links below.
MOW WITH EASE
FRONT SWIVEL CASTER WHEELS
Front swivel caster wheel model offers increased ease of maneuverability in highly landscaped areas. Swivel wheel accessory also available to convert fixed wheel models.
FULLY FABRICATED AND WELDED STEEL CUTTER DECK
MILITARY-GRADE STEEL - DECK
Extra-strong fabricated (non-stamped) steel cutter deck features 14-gauge, grade 100 Military-Grade steel deck shell, 12-gauge spindle reinforcement plate and ¼" side reinforcement bar, all while delivering the quality-of-cut you’d expect from a Scag mower.
FULLY FABRICATED AND WELDED STEEL FRAME
MILITARY-GRADE STEEL - FRAME
Extra-strong, fully fabricated steel frame (not cast aluminum). The Military-Grade steel spec used on the SFC30 is over 200% stronger than standard drawing steel found in common stamped frames and decks in this machine class.
SINGLE POINT HEIGHT-OF-CUT ADJUSTMENT
FINE-TUNED AND SIMPLE
Adjust the height-of-cut from a single location rather than at all four corners or having to adjust the front and back tires separately. Refine your height settings with adjustments from 1.5" to 5" in .25" increments.
OFFSET BLADE SET UP
SIMPLIFIED DECK DRIVE SYSTEM
An offset blade design is less complex and easier to maintain than traditional timed deck setups. This more robust system results in potential belt replacements taking less than half the amount of time to repair/replace compared to timed deck systems. Image shown with bagging baffle.
SCAG LEVEL QUALITY-OF-CUT
UNMATCHED PERFORMANCE
The large cutting chamber helps process more grass while being able to eat through wet and lush spring time grasses more efficiently. Cutter deck discharge opening is oversized for its class.
OPERATOR CONTROL PANEL
ERGONOMIC CONTROLS
Angles of operator station controls match the natural angles of your outstretched hands. All controls are within easy reach: blade brake engagement, drive engagement, recoil start, throttle/choke, hour meter and park brake.
OVERSIZED ADJUSTABLE CONTROLS
ACHIEVE MAXIMUM COMFORT
Oversized handles feature internally routed cables to protect from potential snags. Handle features tool-free adjustment, up and down, to fit operator height preference. Additional vertical adjustment setting for transportation or storage.
DISCHARGE – MULCH – BAG
3-IN-1 VERSATILITY
The SFC30 delivers the ability to discharge, mulch or bag. All options come as standard equipment, allowing the operator to change on the fly as needed. Discharge: discharge chute – Mulch: deck plug and mulch plate – Bag: bagging baffle, mulch plate and fabric bag
POWERFUL TRANSMISSION & ENGINE COMBO
MAXIMUM POWER FOR TOUGH CUTS
The combination of a GT MV702 best-in-class transmission and Kohler CV224 engine bring the power for optimum performance in the toughest of cutting conditions.
Contact us if you would like an estimation on a monthly payment.
To save time, you can get pre-approved from home at the links below.
MOW WITH EASE
FRONT SWIVEL CASTER WHEELS
Front swivel caster wheel model offers increased ease of maneuverability in highly landscaped areas. Swivel wheel accessory also available to convert fixed wheel models.
FULLY FABRICATED AND WELDED STEEL CUTTER DECK
MILITARY-GRADE STEEL - DECK
Extra-strong fabricated (non-stamped) steel cutter deck features 14-gauge, grade 100 Military-Grade steel deck shell, 12-gauge spindle reinforcement plate and ¼" side reinforcement bar, all while delivering the quality-of-cut you’d expect from a Scag mower.
FULLY FABRICATED AND WELDED STEEL FRAME
MILITARY-GRADE STEEL - FRAME
Extra-strong, fully fabricated steel frame (not cast aluminum). The Military-Grade steel spec used on the SFC30 is over 200% stronger than standard drawing steel found in common stamped frames and decks in this machine class.
SINGLE POINT HEIGHT-OF-CUT ADJUSTMENT
FINE-TUNED AND SIMPLE
Adjust the height-of-cut from a single location rather than at all four corners or having to adjust the front and back tires separately. Refine your height settings with adjustments from 1.5" to 5" in .25" increments.
OFFSET BLADE SET UP
SIMPLIFIED DECK DRIVE SYSTEM
An offset blade design is less complex and easier to maintain than traditional timed deck setups. This more robust system results in potential belt replacements taking less than half the amount of time to repair/replace compared to timed deck systems. Image shown with bagging baffle.
SCAG LEVEL QUALITY-OF-CUT
UNMATCHED PERFORMANCE
The large cutting chamber helps process more grass while being able to eat through wet and lush spring time grasses more efficiently. Cutter deck discharge opening is oversized for its class.
OPERATOR CONTROL PANEL
ERGONOMIC CONTROLS
Angles of operator station controls match the natural angles of your outstretched hands. All controls are within easy reach: blade brake engagement, drive engagement, recoil start, throttle/choke, hour meter and park brake.
OVERSIZED ADJUSTABLE CONTROLS
ACHIEVE MAXIMUM COMFORT
Oversized handles feature internally routed cables to protect from potential snags. Handle features tool-free adjustment, up and down, to fit operator height preference. Additional vertical adjustment setting for transportation or storage.
DISCHARGE – MULCH – BAG
3-IN-1 VERSATILITY
The SFC30 delivers the ability to discharge, mulch or bag. All options come as standard equipment, allowing the operator to change on the fly as needed. Discharge: discharge chute – Mulch: deck plug and mulch plate – Bag: bagging baffle, mulch plate and fabric bag
POWERFUL TRANSMISSION & ENGINE COMBO
MAXIMUM POWER FOR TOUGH CUTS
The combination of a GT MV702 best-in-class transmission and Kohler CV224 engine bring the power for optimum performance in the toughest of cutting conditions.
